Design Of A Seven-Story Vertical Circulation Mechanical Parking Garage (SW2014 + Detailed CAD Engineering Drawing) – 3D Model SolidWorks

Design model of a seven-story vertical circulation mechanical parking garage (solidworks2014 + detailed CAD drawing) Vertical circulation mechanical parking equipment is a parking system that uses a vertical circulation motion to store and retrieve vehicles. Vertical circulation mechanical parking equipment has the advantages of single power, simple control, small footprint, easy operation, fast vehicle retrieval speed, and economic reliability. The parking equipment controls the equipment’s circulation operation through a programmable controller. The car is parked on the bracket, and the bracket moves up and down with the chain. The car on any layer of the bracket can be quickly lifted to the ground to achieve three-dimensional storage, overcoming the complicated process and operation process of multi-layer parking equipment, greatly saving time, and the whole process is easy and convenient. 1. Working Principle The working principle of vertical circulation mechanical parking equipment is that the motor drives the transmission mechanism through the reducer. On the traction component-the chain, a parking bracket is installed at a certain distance. When the motor starts, the parking bracket moves vertically with the chain to achieve the purpose of storing and retrieving vehicles. When parking, the driver drives the car to the exact position of the parking bracket in the garage, closes the door and exits the garage, presses the operation button, the motor starts, the parking bracket moves, and the other parking bracket rotates to the entrance position and stops. At this time, the next parking operation can be performed. When picking up the car, press the parking space number button on the operating device, the motor starts, and under the action of the programmable controller, it runs to the exit in the shortest distance. The driver enters the parking bracket and drives the car out of the garage.
SW2014 source file + CAD engineering drawing all files, standard parts may be missing, because I call the standard parts such as screws in the 3D library, but it does not affect the use, vomiting blood to share.