Robotic CNC Milling System (Automatic Milling Workstation) – 3D Model SolidWorks

This project is an automatic milling workstation. The workstation uses a special quick-change switching fixture (10 sets in total). The quick-change fixture is equipped with a special storage rack. The bottom of the quick-change fixture storage rack has casters and can be moved manually. This milling system uses a single robot to drive an electric milling head to mill the workpiece. There is a total of one set of milling devices. The milling device includes 1: electric milling head (Hai Tieke), 2 end mill holders; multiple 3-edge/4-edge end mills; the system provides a special end mill grinder for grinding the worn end mill bottom edge. When the milling cutter is replaced or the milling cutter is worn, the corresponding height difference can be automatically compensated by the tool setting instrument; a demagnetizer is installed in the system, which can eliminate the magnetism of the electric milling head within the specified time. The fixture mounting base is compatible with a variety of products, and each product is installed through quick-change positioning. The system protection fence is assembled with an aluminum profile skeleton and inlaid with a 36.5*36.5*2.5 black protection net and PC endurance board. The system protection fence adopts the back opening and closing safety door style; explosion-proof LED lighting is installed on both sides of the system protection fence to provide a lighting source for the system; a tool holder prevention frame and a tool setting instrument are installed on the right inner side of the system protection fence, and an in-situ detection switch is installed at the tool holder placement position to facilitate the robot to automatically switch the tool holder and quickly calibrate the tool.
Including 3D model + automatic milling system project BOM table – purchased parts (request for purchase).xlsx