Automatic Welding Machine For Special-Shaped Steel Cage (In Mass Production) – 3D Model SolidWorks

Add to wishlistAdded to wishlistRemoved from wishlist 0
Sold by
Evie Lowe

This Project only for Members

A

The automatic welding machine for special-shaped steel cages is mainly composed of a frame, a warp guide mechanism, a longitudinal welding mechanism, a feeding mechanism, a transverse welding mechanism, a warp traction mechanism, a guide rail, a weft correction mechanism and a transmission mechanism. The warp guide mechanism is fixed to the front end of the frame, the longitudinal welding mechanism is fixed to the frame and is located directly above the warp guide mechanism, the feeding mechanism is located behind the longitudinal welding mechanism and fixed to the rear end of the frame, the transverse welding mechanism is located on the side of the frame, the warp traction mechanism is arranged on the guide rail, the weft correction mechanism is located on one side of the warp guide mechanism and fixed on one side of the frame, and the transmission mechanism is located inside the frame and links the longitudinal welding mechanism, the feeding mechanism and the weft correction mechanism. It not only makes special-shaped welding possible, but also has precise automation, replaces manual labor, reduces labor intensity and greatly improves the efficiency of special-shaped welding, and can be widely used in engineering construction and other fields.
1-frame, 2-warp steel bar, 3-warp guide mechanism, 31-guide hole, 4-longitudinal welding mechanism, 41-longitudinal electrode plate, 42-longitudinal welding gun, 43-welding gun support platform, 44-crank slider mechanism, 45-weft positioning baffle, 46-longitudinal welding bracket, 5-feeding mechanism, 51-groove wheel mechanism, 52-feeding wheel, 521-feeding trough, 53-feeding box, 531-inclined plate, 532-mounting plate, 54-feeding guide frame, 541-upper guide frame, 542-lower guide frame, 543-spacing adjustment plate, 544-fixed plate, 545-adjusting spring, 546-bump, 55-drive shaft, 6-transverse welding mechanism, 61-transverse welding gun fixing frame, 62-transverse welding gun, 63-transverse electrode plate, 64-transverse electrode plate fixing frame, 65-welding contact switch, 66-hydraulic cylinder, 7-warp traction mechanism, 71-electromagnetic sleeve, 72-gear, 73-stepping motor, 74-traction mechanism contact switch, 75-warp locking contact switch, 76-traction bracket, 8-guide rail, 9-control panel, 10-weft pushing mechanism, 101-cam mechanism, 102-pushing rod, 103-pushing rod frame, 104-inclined slide, 105-sliding rod, 11-transmission mechanism, 111-main motor, 112-reduction box, 12-weft reinforcement.

Specification: Automatic Welding Machine For Special-Shaped Steel Cage (In Mass Production) – 3D Model SolidWorks

Industrial Use

, ,

Design Software

Version

Editable

File Formats

, , ,

Sharing Level

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Automatic Welding Machine For Special-Shaped Steel Cage (In Mass Production) – 3D Model SolidWorks”

Automatic Welding Machine For Special-Shaped Steel Cage (In Mass Production) – 3D Model SolidWorks
Automatic Welding Machine For Special-Shaped Steel Cage (In Mass Production) – 3D Model SolidWorks
3D Mechanical Design Library
Logo
Shopping cart